TIPS ON HOW TO MANUALLY INPUT POWERVU KEY ON QSAT DECODER

      In my previous post, new software for powervu solving audio bug fixing was released but people find it difficult to add key on qsat but now the solutions has come to it which I think you have been waiting since please make sure you read carefully start from the first letter to the last letter any unreasonable protest and queries or questions will not be answer

REQUIREMENT

—-> Qsat decoder

—-> If you have not download the latest software kindlyfollow this link to download

—-> Get active or working mtn nationwide powervu key as follows
Key 00:98 65 B2 62 77 F7 AB
Key 01:FF FA 91 E9 7B 25 70
Please note that this key will be active for short period till service provider change the key once change it has become invalid

—-> MTN nationwide powervu channels read and learn more here on how to install the channels

TIPS TO MANUALLY INPUT POWERVU KEY ON QSAT

—-> Press menu

—-> Navigate to “Settings” press Ok button

—-> scroll down to “XCAM” press Ok button

—-> Then press Ok button on “PATCH” press Ok button pop up patch menu

—-> Then under “CAS TYPE” navigate to powervu

—-> Press red button to add or green button to edit

—-> scroll down to “key (hex)” type the above key on the same column by adding 00 at the end of the first key then end with 00 at the end of the second key as follows9865B26277F7AB00FFFA91E97B257000

How 2 Recover/Revive a dead Qsat 
Once there is power outages while trying to upgrade your qsat .there is a bound to be soft-break known as “download from ts on your decoder.in this situation your decoder well not be able to boot.To fix this,you need the following requirements:
1.Stable electricity
2.Download any software at your disposal,however I will advice you to use the oldest software available for revival process
3.Get a clean compatible Empty usb flashdrive.Now since you now have the requirements.please ensure you have already extracted your software
.The defaul extension of the file is ****.bin
N/B;→if you are seeing the .bin in your own case,it means you are using a windows computer with hidden file extension.please set your computer to show file extension or rename the file.
You will have to rename the software from whatsoever is the default to “rom”remember older versions of qsat,we had to rename it to “rom.bin”if you rename it to rom.bin for qsat q23g.that qsat wont detect the software.You will have to completely delete the file extension(.bin)and also change the name of the file to rom,once you are done doing this,the next thing is for you to;
1.copy the renamed software into your flashdrive.
2.completelly power Off your decoder
3.insert your flashdrive to the usb port on the decoder
4.power On your decoder.now sit back and relax for the “rom” to performs its magic and bring your decoder back to life.

SOME SECRET’S & MASTER CODES FOR STRONG RECEIVERS.
Please I have been receiving phone calls from my fellow members(colleagues)Installers.asking if their is a Master codes for Receivers to enable them

have access to Installations.Some people normally change their default password(0000)to something unknown to you.Especially installers are fun of doing these things.incase you met this kind of situation all you need to do is to learn this master codes.In order to have access to it.just master these codes and you are done.
Master Codes;
Defaul code is (0000)
Master codes;(0103),(3010),(0235),(0325),(1361),(6969),(6260),(8286),(8280),(8281),etc.

SECRET CODES TO WATCH ADULT CHANNELS ON STRONG DECODERS

Infact there are thousand of channels on strong decoders which have been Encrypted dollar $ symbol.A common question that has been occurring ,my blog readers always ask,how to watch (porn),Tv3 etc.On strong decoders.All these and other channel are there for you to watch.I have laid my hand on codes to Un-encrypted all these channel.while,i shall specifying some strong decoders which support these codes,you should not be limited to the list of decoders mentioned here tried this codes on any other strong decoders in your possession.There is no harm in trying.Be warned ,Dont edit anything  else, you may end up damaging your decoders.
 SUPPORTING STRONG DECODERS SRT4920,4922,4922A,4922D+Special functions;
 ⇨To open patch dial 6969(twice)⇨To open Bisskey edit menu dial 8280⇨To open Key code edit menu dial 8282⇨To open Server edit menu dial 8281
 How to open Hardcore channels(Porn)
 ⇨Press menu
 ⇨Goto entertainment
 ⇨Dial 9696 to open Iptv list,press Ok to call channel list all has tobe selected.
 ⇨Finally press F4.
 To open Adult Iptv channelsS

 ⇨Go to Iptv list and press Ok,press F4(To call Iptv list)finally press 9696

 SRT4950,4950H,4950E,4950M→Open patch ;F1+6969,open server settings menu;F1+8281,open key setting menu F1+8280 finally press www.key on the Remote press f1+9999 and You porn icon will pop up.












































 














 

Qsat powervu software for q23g

https://www.sendspace.com/file/gh5010